PT-DS20 Projector
A compact 20 000 lumens SXGA+ Projector designed for large venues.
High-brightness in a small package
The PT-DS20k is the 4x3 aspect ratio version of the PT-DZ21k and offers 20,000 lumens of brightness with 3-chip DLP image quality. This is part of the Panasonic 3-chip DLP series of projectors and utilises the same range of D75 lenses.
PANASONIC PT-DS20k TECHNICAL DATASpecifications
Model |
PT-DS20K |
|||
|---|---|---|---|---|
Power supply |
200–240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V) | |||
Power consumption |
2,300 W (0.3 W with STANDBY MODE set to ECO,*1 9 W with STANDBY MODE set to NORMAL.) |
|||
Dissipation BTU |
Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour) | |||
Display method |
DLP™ chip x 3, DLP™ projection system |
|||
DLP™ chip panel size |
24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) |
|||
Pixels |
1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels |
|||
Lens |
Optional powered zoom and fixed-focus lenses | |||
Lamp |
465 W UHM lamp x 4, replacement cycle of up to 2,000 hours*2 | |||
Screen size (diagonal) |
1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 4:3 aspect ratio |
|||
Brightness |
20,000 lm (four-lamp) |
|||
Center-to-corner uniformity |
90% | |||
Contrast |
10,000:1 (full on/off, with dynamic iris set to “3” ) | |||
Resolution |
1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) |
|||
Optical axis shift |
Vertical |
±50 % (±40 % with the ET-D75LE6) from center of screen (powered) |
||
Horizontal |
±30 % (±20 % with the ET-D75LE6) from center of screen (powered) |
|||
Keystone correction range |
Vertical: ±40°*6, horizontal: ±15° | |||
Keystone correction range with optional Upgrade Kit |
Vertical: ±45°*6*8, horizontal: ±40°*7*8 | - | ||
Installation |
Ceiling/floor, front /rear | |||
Terminals |
SDI 1 IN |
BNC x 1 (3G/HD/SD-SDI) | - | |
SDI 2 IN |
BNC x 1 (HD/SD-SDI) | - | ||
3D SYNC IN/OUT |
BNC x 1 (3D timing signal) | - | ||
3D SYNC OUT |
BNC x 1 (3D timing signal) | - | ||
DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
|||
HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) | |||
RGB 1 IN |
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) | |||
RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) | |||
VIDEO IN |
BNC x 1 (composite video) | |||
SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |||
SERIAL OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |||
REMOTE 1 IN |
M3 x 1 for wired remote control | |||
REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) | |||
REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) | |||
LAN |
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) | |||
Cabinet materials |
Molded plastic | |||
Dimensions (W x H x D) |
620 x 291*9 x 800 mm (24-7/16" x 11-15/32"*9 x 31-1/2") (optional lens not included) | |||
Weight |
Approximately 43 kg (94.8 lbs) (optional lens not included) | |||
Operation noise |
49 dB (quad lamp operation) | |||
Operating environment |
Operating temperature: 0–45°C (32–113°F), operating humidity: 10– 80 % (no condensation) |
|||
