Edinburgh Projector Hire

Key Features
WUXGA resolution (1920 x 1200 pixels) in 16 : 10 format
Brightness: 20,000 ANSI lumens
Contrast ratio: 10,000 : 1
Quad Lamp DLP Projector
Hot swap lamp system
Network control via RJ45 (LAN)
Optional powered zoom/focus lenses and fixed-focus lens

PANASONIC PT-DZ21K TECHNICAL DATA

Category Professional

Application areas
Board room/auditorium
Digital signage
Education & training room
Exhibitions & events
Major events
Conference room
Professional cinema
Simulation

Panel: 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
Panel type: DLP chip x 3, DLP projection system
Lamp: 465 W UHM lamp x 4
Brightness: 20000 ANSI lumens
Contrast ratio: 1000 : 1
Resolution in pixels: 1920 x 1,200 (WUXGA)
Uniformity: 90 %

Connections:
SDI 1 IN: BNC x 1 (3G/HD/SD-SDI)
SDI 2 IN: BNC x 1 (HD/SD-SDI)
3D SYNC IN/OUT: BNC x 1 (3D timing signal)
3D SYNC OUT: BNC x 1 (3D timing signal)
DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN: BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN: D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN: BNC x 1 (composite video)
SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN: M3 x 1 for wired remote control
REMOTE 1 OUT: M3 x 1 for link control (for wired remote control)
REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
LAN: RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink

Keystone correction: Vertical: 40, Horizontal 15%
Lens shift (Powered) : Vertical (Powered) +50% from center of screen
Horizontal (Powered) +20% from center of screen
Zoom/Focus: Depending on lens
Power consumption: 2,300 W, (0.3 W with STANDBY MODE set to ECO, *1 9 W with STANDBY MODE set to NORMAL.)
Voltage: 200 - 240 V

Lenses: See our Triple-Chip DLP Lens Hire Stock here